Rifle barrels will be removed and replaced (often several times) during custom gun and restoration work. In order to keep headspace perfect and the sights top dead center, marks can be used for realignment. They can be called index marks or timing marks. There is one on the barrel and one on the action, and they show you when the alignment is perfect.
One way to do this is with a spear point punch, this can be fabricated easily by regrinding a cape chisel. Grind your spear point to a less than 90 degree point. Put the point at the junction of the barrel shank and the action, be sure you are not leaning the chisel and give it a wack with a hammer.
When you fit a barrel give it a mark; and when you are going to remove a barrel for work, mark it BEFORE you remove the barrel.



With some chalk or rubbings from a lacquer stick in the marks they are very easy to see while you have the barrel and action in the barrel vise with the action wrench on.